Printing the box
Time required
Preparation: 30 Minutes
Print Time: approx. 15 hours
Tools required
3D-Printer (Prusa recommended)
Parts required
ASA Filament
SuperGlue
2-Component Epoxy
The right printing material
We choose ASA (DuraPro ASA) as our printing material of choice:
Light (approx. 30% lighter than PETG)
Stable - good layer adhesion (compared to ABS)
Settings for the slicing / printing
The complete config bundle for the PrusaSlicer, most current STL Files ande more can be downloaded here:
The brim is important, when printing with ASA. ASA tends to warp and contract - this holds the print better to the plate.
Density is set to 100% - the box is designed, to print in 4+ perimeters, this makes sure, all the cavities are filled.
Printing the parts
Box - Front
Box - Back
Wing-Connectors
Box - Cover
Glue the holders to the box & box parts together
Glue camera glasses to the box
Finalization & Testing
Last updated