Equipping the box with all components
This part is outdated. Please refer to the "Add components to the box" section of this manual.
Time required
Building: 1 hour
Curing: 2 days
Tools required
Loctice 243
9mm wrench
Parts required
all elecrtonic parts
3d printed box
cover for box
screws 1.7mm x 4mm for camera
... 2.2mm x 6.5 for everything else
silicon
pen
Step 1: Install the servo connectors
Give special instrucktion...
Step 2: Install Raspberry Pi and Camera
Step 3: Install the Power Module
Step 4: Prepare the cover
Step 4: Combining front and back
Connecting all the cables
Servo Cables
Brown (GND) "up" (away from cover)
Aileron left & right are "identical" - doesnt matter, which is connected to 1 / 5
Connection 6 is left empty
Finalization & Testing
Last updated