Batteries

Requirements

• LiPo battery

• Titanex power cable 2.5 mm²

• shrinking tube

• Weipu connector

• balancer board

• PlastiDip

Tools

• label printer

Safety

When working on the batterey terminals take care to not short circuit the battery. Always tape the loose end if you work on another end

Aseembly

Prior to assembly make sure the battery works and has proper voltage levels.

Add basic information

Use a label printer and add a label with the minimum and maximum battery voltage to the battery.

Add a unique identifying label to the battery. Suggestion: "<dronename>-01".

Add Weipu connector

...

PlastiDip application

...

Testing

Make sure the Weipu connector is wired correctly.

Pin 1 should be XXX.

Pin 2 should be XXX.